5000 LPH Industrial RO Plant

Commercial/Industrial RO Plants are best suitable for normal drinking application to the specific usage, such as – Food Processing, Pharmaceuticals, Dialysis, Boiler Feeding, Beverages Effluent and Wastewater Purification, Fruit Syrup Production, Hydrogen Production and various other Commercial/Industrial usages

Category:

Product Description

5000 lph TECHNICAL SPECIFICATIONS

 

Flow Rate :

Feed Water                 :             9000 Liter Per Hour

Treated Water             :             6000 Liter Per Hour

Reject Water               :             3000 Liter Per Hour

1 RAW WATER PUMP

Purpose To feed the Dual Media Filter at pressure more than 2.0 bar, which is min. operating pressure for filter.

Specifications a) MOC : CI

  b) Type : Horizontal Centrifugal

  c) Flow Rate  : 14400 liters per hour

  d) Head : 25 m

  e) Power Required: 3 HP

  f) Electrical : 440 V, Three phase , 50 hz

  g) Cycle : 2900 rpm

  h) Make : Kirlosker, CRI, Crompton Greaves.

  i) Quantity  : 1 No.

 

2 DUAL MEDIA FILTER

Purpose To remove the total suspended solids, dirt , iron and reduce silt density index which can foul the membranes

Specifications Vessel :

 
a) Make : ADS Or Equilent

b) Material of Construction : FRP

c) Diameter : 30”

  d) Height : 72” mm

  e) Testing Pressure : 10 kg/cm2

  f) Opening : Top and Bottom

  g) Quantity : 1 No.

  Valve :

  a) Make : Initiative

  b) Material of Construction :

  c) Type : Multiport Single lever value

  d) Size : 1.5”  inches

  e) Maximum Flow Rate: 24000 LPH

  f) Working Pressure : 2-4 Bar

  g) Working  :  Down-Flow

  Media :

   Mixed bed sand media consisting of the following

  i) Gravel   ii) Pebbles  iii) Quartz Sand  iv) Anthracite

  Average Porosity  50 micron particulate size

  Bed depth  : 600 mm

  Pipelines & Accessories:

   Pipe of PVC 10 Bar tested pressure

 

3 ACTIVTED CARBON FILTER

Purpose To remove the total color, smell, odor, from the water.

Specifications Vessel:

 
a) Make: ADS Or Equilent

b) Material of Construction: FRP

c) Diameter: 30”

  d) Height: 72” mm

  e) Testing Pressure: 10 kg/cm2

  f) Opening: Top & Bottom

  g) Quantity: 1 No.

  Valve:

  a) Make: Initiative

  b) Material of Construction: Noryl

  c) Type: Multiport Single lever value

  d) Size: 1.5 inches

  e) Maximum Flow Rate: 24000 LPH

  f) Working Pressure: 2-4 Bar

  g) Working:  Down-Flow

  Media:

   Mixed bed sand media consisting of the following

  i) Gravel   ii) Pebbles  iii) Carbon

  Average Porosity 50 micron particulate size

  Bed depth: 600 mm

  Pipelines & Accessories:

  Pipe of PVC 10 Bar tested pressure

4
 

DOSING SYSTEM

Purpose To dose Antiscalant chemical to protect the scaling formation on RO membranes.

Specifications a) MOC : PP ( Edose)

  b) Capacity : 6 LPH

  c) Pressure : 7 Bar

  d) Qty. : 1 No.

 

 

5 MICRON FILTER

Purpose To remove the fine particles up to 05 microns and reduce silt density index levels to acceptable level.

Specifications Cartridge Filter & Housing

  Housing  :

  a) Make: Flowtec

  b) MOC of Housing: PP

  c) Length : 20”

  d) Diameter: 5.5”

  e) Quantity : 4 no.

  Cartridge :

  f) Make : Flowtec

  g) Cartridge MOC : Polypropylene

  h) Length:  20”

  i)  Diameter : 4.0”

  j) Quantity: 4 no.

  k) Micron rating : 05 micron

 

6 HIGH PRESSURE PUMP

Purpose To feed the Reverse Osmosis Membrane at pressure more than the osmotic pressure taking into consideration flux rate, flow and recovery.

Specifications a) MOC : Stainless Steel

  b) Type : Vertical Multistage

  c) Flow Rate  : 10500 liters per hour

  d) Head : 120 mwc

  e) Power Required : 5 HP

  f) Electrical : 440 V, three phase , 50 hz

  g) Cycle : 2900 rpm

  h) Make CRI or Lubi

7 RO MEMBRANE

Purpose To remove the major part of TDS upto 98% by Reverse Osmosis Membranes arranged and designed to give adequate flow and recovery.

Specifications a) Type : Spiral Wounded

  b) Diameter of Membrane : 8.0 inch

  c) Length of Membranes : 1 Mt.

  d) No. of Membranes : 5

  e) Recovery per Membrane : 10-15%

  f) Salt Rejection per Membrane  :  98-99%

  g) Make of Membranes :  Toray or Equilent

  h) System Recovery : 45 -55 %

 

8 RO PRESSURE TUBE

Purpose To pack Reverse Osmosis Membranes and operate at high pressure up to 300 psi

Specifications a) MOC : FRP Composite

  b) Diameter of Pressure Vessel : 8.2 inch

  c) Length of Pressure Vessel :  120”

  d) No. Pressure Vessels : 2

  e) No. of Membrane per Vessel :   2 and 3

  f) Make : Seaflo, Shark or Equilent

  g) Position : Horizontal, Series

  h) Arrays  : 2 No.

 

 

 

9 ELECTRICAL PANAL

Purpose A control panel is provided as a safety measure for the pumps & other electrical items.

Specifications a) Complete Starters, Overload relays, and single-phase preventor for Pump.

  b) Voltmeter, Ammeter, MCB’s, indicating lights

  c) Push Buttons

 

 

10 INSTRUMENTATION

Purpose a) Flow Meter : To measure the online flow of water

  b) Low Pressure Switch  : To protect RO pump from dry running

  c) High Pressure Switch  : To protect RO pump from back pressure

  d)  Pressure Gauges  :  For calculate ^P for each unit in RO system

Specifications Rota Meter :

  Quantity   :   2 Nos.( permeate & reject line)

  Range  : 1.0 cu.m. per hour

  Make  :   Flowtec

  Pressure Switch :

  Quantity   :   2 No.(Low & High)

  Range  : 0-450 psi

  Make  :  Indfos, India

  Pressure Gauges  :

  Quantity  :  6 No.

  Range :  0 – 7 bar

  Dail Size  :  6  inches

  Type  :  Bourdon

  Make  : Seaflo

 

11

 

PLUMBING & FITTINGS

  a) Valves, pipelines RO module is in upvc,

  c) The System will be on common SS base frame

Reviews

There are no reviews yet.

Be the first to review “5000 LPH Industrial RO Plant”

Your email address will not be published. Required fields are marked *